Pulsed Erbium-doped Fiber Amplifier For Optical Sensor
Product Description
Product Detail
1. Introduction of Pulsed Erbium-doped Fiber Amplifier For Optical Sensor
The pulsed erbium-doped fiber amplifier is a fiber amplifier product series dedicated to picosecond and nanosecond laser pulses. It outputs high-power laser pulses while minimizing fiber nonlinear effects, and has the advantages of high gain and low noise. Support the software control of the host computer.
2. Feature of Pulsed Erbium-doped Fiber Amplifier For Optical Sensor
Short pulse amplification;
High peak power;
Customizable parameters.
3. Application of Pulsed Erbium-doped Fiber Amplifier For Optical Sensor
Lidar;
Optical fiber sensor;
Fiber laser.
4. Optical-Electrical Characteristic of Pulsed Erbium-doped Fiber Amplifier For Optical Sensor
| Parameters | Unit | Values | Notes |
| Operating wavelength | nm | 1530~1565 | *Optional narrow band filter |
| Pulse width | ns | 0.1~50 | |
| Pulse frequency | KHz | 1~1000 | |
| Peak value of input pulse | mW | 1~10 | |
| Peak value of output pulse | W | 1~1000 | |
| Noise figure | dB | 5.5 | |
| Gain flatness | dB | 3 | |
| Polarization dependent gain | dB | 0.5 | |
| Polarization mode dispersion | ps | 0.5 | |
| Input/Output isolation | dB | >35 | |
| Fiber type | - | SMF-28e | |
| Connector | - | FC/APC | |
| Operating mode | - | Automatic current control(ACC) | |
| Dimensions | mm | 260(W)×280(D)×120(H) | Benchtop |
| 125(W)×150(D)×20(H) | Module | ||
| Power supply | V | AC 110~240V, <30W@25℃ | Benchtop |
| 5V DC, <15W | Module | ||
| Control mode | - | RS232 Serial communication | Module |
| Communication Interface | - | DB9 Female | Module |
| Operating temperature | ℃ | -5~ +55 | |
| Operating humidity range | % | 0~70 |
5. Deliver,Shipping And Serving of Pulsed Erbium-doped Fiber Amplifier For Optical Sensor
All products have been tested before shipping out;
All products have 1-3 years warranty.(After the quality guarantee period began to charge appropriate maintenance service fee.)
We appreciate your business and offer an instant 7 days return policy. (7 days after receiving the items);
If the items you purchase from our store are not of perfected quality, that is they don‘t work electronically to manufacturers specifications, simply return them to us for replacement or refund;
If the items are defective, please notify us within 3 days of delivery;
Any items must be returned in their original condition to qualify for a refund or replacement;
The buyer is responsible for all the shipping cost incurred.
6. FAQ
A: C-band or L band wavelength.
Q: What output power would you like?A: We have 100W 200W 500W 1000W options, we can also customize according to your requirement.
Q: About the package dimension, do you have any requirement?A: We have the module type and benchtop for choice.